Cisco TelePresence System Profile Series User Manual page 31

Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents Getting started
Using Multiway to call more than one
™
All systems described in this User guide offer Multiway as a means to call more
than one. Note that successful use of Multiway requires the presence of certain
infrastructure products. If in doubt check with your system administrator.
Using Multiway, Case 1
Assume that you already are in a call and that you would like to expand the call to include
someone else.
Do as follows:
Start calling someone else by pressing the
Call
Presentation
Camera control
Settings
Enter the number or URI of the person to be included, either directly or by means of the
phone book or the list displayed) and place the call by pressing the
the current call on Hold. When the new participant replies, select Join Calls.
Call on hold
Your call with
james.dowe@somecompany.com
is on hold.
Resume Join calls
All three of you will now be in the same meeting.
Repeat to include more participants if needed.
D14852.01 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Making calls Making calls
or the key on the remote control.
HOME
CALL
abc
Recent calls
alice.wonderland@everywhere.co.nl
norah.dollhouse@somecompany.com
My contacts
Dorian Grey
Hedda Gabler
Phone book
Floria Tosca
key. This will put
Hold
Phone book usage In-call features
Using Multiway, Case 2
Someone calls you while you are in a call. You will need to decide whether the calling party
shall be invited to join the current call or not.
Someone calls you while you are in a call. A dialog box giving you three options will be
shown.
Select Accept (put current call on hold).
When you are ready to create the conference, select Join Calls.
Call on hold
Your call with
james.dowe@somecompany.com
is on hold.
Resume
All three of you will now be in the same meeting.
Case 2 options: If you do not want to set up a Multiway conference, you have the following
choices in 2. above:
• If you want to accept the incoming call instead of the current call, select Accept
(disconnect current call).
• If you do not want to respond to the incoming call, select Reject.
The maximum number of participants in a Multiway call is limited by the capabilities of the
infrastructure of your network only. The two cases described on this page may be combined
as much as you want.
31
Advanced settings
Incoming call
norah.dollhouse@somecompany.com
550092
Accept (put current call on hold)
Accept (disconnect current call)
Reject
Join calls Hold
User guide
Contact us
www.cisco.com