Memory Configurations; Rules For Adding Memory - Acer V60N User Manual

6. Plug in the fan cable to the two-pin fan connector marked JP2 on
the system board.
1.7

Memory Configurations

The system board comes with six 72-pin SIMM sockets that support 4-
MB and 16-MB single-density SIMMs and 8-MB and 32-MB double-
density SIMMs, with or without the Extended Data Out (EDO) function.
Table 1-3 lists the possible memory configurations.
1.7.1

Rules for Adding Memory

Use only one type of SIMM in a given bank.
You may combine different types of SIMMs for a memory
configuration as long as the SIMMs in each bank are of the same
type.
Always install SIMMs in pairs. For example, for a total memory of
8 MB, install two 4-MB SIMMs into the sockets marked S1 and S2
or S3 and S4. You can not use an 8-MB SIMM alone for an 8-MB
memory.
Always install SIMMs from the outermost socket first.
example, socket S1 before socket S2, or socket S3 before
socket S4.
Always remove SIMMs from the innermost socket first.
example, socket S4 before socket S3, or socket S2 before
socket S1.
System Board
For
For
1-11