Keypad Overview - Arctic Spa ARCTIC ESSENTIALS Y Series Owner's Manual

Arctic Essentials Owners Manual

Keypad Overview

Description
Heater
Filter
Smart Winter
Mode
Spa Functions
Off Mode
Pressing Pump 1 for 5 seconds
will enable the Off mode.
This mode allows you to
stop all outputs including
automatic functions such as
filter cycle, heat request and
smart winter mode for
30 minutes to perform quick
spa maintenance. When Off
mode is active, the display
will toggle between the "OFF"
message, the clock and the
water temperature.
The spa light will flash for
a few seconds before the
end of the 30 minutes to
warn you that the system is
about to resume its normal
operation. Press Pump 1
or Pump 2 (if available) to
restart the system before the
expiration of the 30 minute
delay. When the system
resumes its normal operation,
the display shows "On" for
3 seconds.
Programming Steps
Program menu
13
The program menu is
accessible by holding down
the Light key for 5 seconds.
Quick Reference Card
Please consult your spa user manual for complete info on the features of your spa system.
1 Pump Model
Set Point Pump 1
Light
Pump 1 Pump 2 key
Press Pump 1 key to turn Not available on all models
Pump 1 on at low speed.
Press a second time to turn Press Pump 2 key to turn
pump to high speed (with a Pump 2 on at low speed.
dual-speed pump*). A third Press a second time to turn
time turns pump off. A built-in pump to high speed (with a
timer automatically turns dual-speed pump*). A third
pump off after 20 minutes, time turns pump off. A built-in
unless pump has been timer automatically turns
manually deactivated first. pump off after 20 minutes,
unless pump has been
The "Pump 1" indicator manually deactivated first.
lights up when Pump 1 is on.
With a dual-speed pump, The "Pump 2" indicator
the indicator will flash when lights up when Pump 2 is on.
pump 1 is on at low speed. With a dual-speed pump,
the indicator will flash when
pump 2 is on at low speed.
* If single speed pump: press Pump key to turn pump on. Press Pump key
again to turn pump off.
Setting the clock
the last parameter only. Enter the program menu by
If there is no action taken holding down the Light key
for 10 seconds, the system
for 5 seconds. The display will
in.k300™
Compact full-function keypad
The Quick Reference Card provides an overview of your spa's main functions
and the operations accessible from your digital keypad.
This QRC depicts a generic overlay, custom versions may vary.
Up
Indicator lights Down
Light key
Press Light key to turn light
on. A second press turns
light off. A built-in timer
automatically turns light
off after 2 hours, unless it
has been manually
deactivated first.
The "Light" indicator lights up
when light is on.
Setting the minutes: Use the
Up or Down keys to adjust
the minutes. Press the Light
2 Pump Model
Pump 1
Pump 2
Indicator lights
Up/Down keys
Use Up or Down key to set
desired water temperature.
The temperature setting will
be displayed for 2 seconds to
confirm your new selection.
2 pump spas have a
combined Up/Down key.
Hold the button to increase
the parameter and release
the button to stop. Hold
the button again to decrease
the parameter.
The "Set Point" icon
indicates that the
display shows the
desired temperature,
NOT the current
water temperature!
Programming the filter/
A filter cycle consists of
purge cycles starting all the pumps and
blower in high speed for
1 minute (purge step) then,
Depending on system
the pump associated with
configuration your spa
Light
Up / Down