4.2
Installing a System Board
Observe the ESD precautions in section 4.1.
The housing accepts ATX system boards. Follow these steps to install a
system board.
1.
Position the housing such that the right side lies flat.
2.
Align the board with the pegs on the housing frame.
3.
Gently press the board until it is properly seated.
4.
Secure the board with screws.
5.
Attach the required cables to the connectors on the system board.
12
Installation Guide
Need help?
Do you have a question about the IDT and is the answer not in the manual?
Questions and answers