Yealink SIP-T4 Series Configuration Manual page 118

##It configures the access URL of the Xtended Services Platform server for
account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net.
##The default value is blank.
account.1.xsi.host = %XSP_ADDRESS%
##It configures the server type of the Xtended Services Platform server
for account X.Example:account.1.xsi.server_type = http.
##The default value is http.
account.1.xsi.server_type =
##It configures the server port of the Xtended Services Platform server
for account X.Example:account.1.xsi.port = 80.
##The default value is 80.Integer from 1 to 65535
account.1.xsi.port =
##########################################################################
#############
##
##
##########################################################################
#############
## Add Time 2015.6.26
account.1.callerid_in_support_header.enable =
account.1.acd.auto_login_enable
account.1.outbound_proxy_fallback_interval =
account.1.transfer_refer_to_contact_header.enable =
account.1.sub_fail_retry_interval =
account.1.update_ack_while_dialing =
account.1.end_call_when_transferred.enable =
account.1.nat.stun_refresh_timer =
account.1.contact_take_line_param.enable =
##########################################################################
#############
##
##
##########################################################################
#############
account.1.acd.call_information =
account.1.acd.refresh_url =
account.1.acd.away_url =
account.1.acd.available_url =
account.1.bla.notify_with_expire.enable =
account.1.bla.subscribe_uri_build_type =
account.1.instance_id.enable =
##########################################################################
#############
##
##
##########################################################################
#############
account.1.phone_setting.call_appearance.calls_per_linekey =
account.1.phone_setting.call_appearance.transfer_via_new_linekey =
account.1.phone_setting.call_appearance.conference_via_new_linekey =
account.1.sip_server.1.invite_retry_counts =
account.1.sip_server.1.only_signal_with_registered =
account.1.reg_failed_retry_min_time =
account.1.reg_failed_retry_max_time =
account.1.line_seize.expires =
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
2017 BROADSOFT INC.
©
V80 Add
=
V80-SP2 Add
V81-Alpha Add
20-BD5476-00
PAGE 118 OF 150