Cleaning And Maintenance - TECHWOOD TCO-6025 Instruction Manual

1. Place the trimmer and the shaving foil gently on the skin.
2. Move the lady shave slowly and with light pressure over the skin.
3. For best results direct the shaver head against the direction of the hair growth.
After use
1. Stop the unit by sliding the switch down.
2. Put the razor on its base.
3. Replace the cover on the unit head.
1. Remove the shaver from its charger base for cleaning.
Notes : Make sure the unit is off and unplugged from the mains.
Do not apply any pressure on the razor's head to preserve it.
2. Do not use acetone, gasoline and abrasive material, wire brush or other sharp
objects on plastic parts.
3. Clean the device after each use.
4. Do not rinse the shaver with hot water (maximum 35°C)

CLEANING AND MAINTENANCE

8