Reconfiguring The System - Acer 9000V User Manual

1.6.5

Reconfiguring the System

You must enter Setup after installing or removing SIMMs to
reconfigure the system.
Follow these steps to reconfigure the system:
1. Turn the system on.
indicating that the total memory does not match the value stored
in CMOS.
2. Press +
appears indicating an incorrect memory configuration.
3. Press twice to exit and reboot the system.
The system boots with the new memory configuration.
If you run WindowsNT, NetWare, or
UnixWare in the system, make sure to run
ECU every time you change the memory
size. See Chapter 4 for information on ECU.
System Board
A memory error message appears,
+ to enter Setup. A warning message
1-11