Advertisement
Port Replicator Installation Instructions
Connecting the Port Replicator
To connect the port replicator, align the right and left
sides of your computer to the corresponding edges of
the port replicator. Slide the port replicator towards
the computer, being careful to also align the port
replicator connector and the guide pins on the
connector to the connector on the back of the
computer.
The port replicator is fully engaged when the release
levers on both sides of the port replicator has clipped
onto the matching holes on the sides of the computer.
Guide Pins
Release Lever
Connecting the Port Replicator
1-3
Advertisement
