Table of Contents
Advertisement
c. Setting up a wired peer-to-peer connection
Connect your LCD TV to your PC as indicated below:
Set up PC (media server):
1
2
Set up TV:
CARD/MGW
1
2
3
Please see the networking glossary on page 20 for an explanation of terms that are in italics .
RJ-45 port
Open your Network
Connections
3
window from the
Start Menu.
Select Local Area
Connection, and
4
click the Properties
button.
Press the CARD/
4-1
MGW button to
open the MGW
home page.
From the home
page, navigate
to Settings and
press OK to
begin the setup
4-2
procedure.
Select Language
4-3
Setup from the
menu.
Select your
preferred
4-4
language and
press OK to
proceed.
or
Select Internet Protocol
(TCP/IP) and click the
Properties button.
Ensure the properties
are set to Obtain an IP
Address Automatically.
Select Network Settings
Select Wired (Ethernet)
and press OK.
Define the IP settings:
Assign the IP address
automatically
(using DHCP ).
Once you've successfully
connected to your home
network, the MGW will
search for, and display,
available media server.
Select the media server
desired and press OK to
confirm.
9
Advertisement
Table of Contents
