Table of Contents
Advertisement
b. Connecting a wired (Ethernet) network
To connect your access point, follow the instructions below:
Please setup and confirm your router's IP and DHCP settings before starting to set up your MGW.
CARD/MGW
1
2
3
Please see the networking glossary on page 20 for
an explanation of terms that are in italics .
8
Internet
Cable/ADSL
Modem
Router
RJ-45 port
DHCP Server
4-1
Press the CARD/
MGW button to
open the MGW
home page.
From the home
page, navigate to
Settings and press
OK to begin the
setup procedure.
4-2
Select Language
Setup from the
menu.
4-3
Select your
preferred
language and
press OK to
proceed.
4-4
Select Network Settings
Select Wired (Ethernet)
and press OK.
Define the IP settings:
a. Assign the
IP address
automatically
(using DHCP ).
b. Refer to
your router's
configuration for
static IP settings.
Once you've successfully
connected to your
home network, the
MGW will search for,
and display, available
media servers. Select
the media server
desired and press OK to
confirm.
Advertisement
Table of Contents
