Using Your Purifier - Levoit Pet Care True HEPA Core P350 User Manual

Hide thumbs Also See for Pet Care True HEPA Core P350:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
GETTING STARTED (CONT.)
3.
Replace the filter cover and twist
[Figure 1.3]
clockwise to lock.
4.
Place the purifier on a flat, stable surface
with the display facing up. Allow at least
38 cm / 15 in of clearance on all sides
of the purifier. Keep away from anything
that would block airflow, such as curtains.
[Figure 1.4]
Figure 1.3
38 cm /
15 in
Figure 1.4
cover should
snap shut
38 cm /
15 in
U S I N G YO U R A I R
P U R I F I E R
1.
Plug in and tap
purifier. The fan will start on level I.
[Figure 2.1]
2.
Optionally, tap
between I, II, and III.
Note:
The indicators are not buttons and
cannot be used to change the fan
speed.
The fan speed indicators will light up
when active.
Fan speed III is the loudest, but cleans
air the quickest.
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at high speed (level III) for
15–20 minutes before using a lower
speed.
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
3.
Tap
to turn off the air purifier.
Figure 2.1
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note: The air purifier will not remember timers or
Sleep Mode.
to turn on the air
to change fan speed
EN
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pet core p350Core p350

Table of Contents