Precautions - Acer PD721 User Manual

E
nglish
Usage Notice

Precautions

Follow all warnings, precautions and maintenance as recom-
mended in this user's guide to maximize the life of your unit.
Warning- Do not look into the lens. The bright light may hurt
your eyes.
Warning- To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- When replacing the lamp for a new unit ensure the
"Lamp Reset" option is selected in the projectors menu.
Warning- When switching the projector off, please ensure the
projector completes its cooling cycle before
disconnecting power.
Warning- When connecting the projector to computer, please turn
on the projector first.
Warning- To reduce the risk of injury to the eyes, do not look
directly into the laser light on the remote control and do
not point the laser light into anyone's eyes. This remote
control contains a Class II laser product.
Warning- When the lamp reaches the end of its life, it will burn
out and may make a loud popping sound. If this
happens, the projector will not turn back on until the
lamp module has been replaced. To replace the
lamp, follow the procedures listed under "Changing
the Lamp".