Before You Begin - Sharp SMD2499FS Wi-Fi Connect Manual

2. BEFORE YOU BEGIN

• Plug in and power on Convection Microwave Drawer
• Ensure your mobile device is connected to a 2.4 GHz Wi-Fi network and disable
Auto-Reconnect / Auto-Join for any other home networks previously setup on your device.
• Ensure that your chosen Wi-Fi network has a good signal strength in the area where you install
your Convection Microwave Drawer™ Oven.
• Please have your home network Wi-Fi name (SSID) and password readily available.
3. PAIRING YOUR APPLIANCE
Sharp Kitchen
• Launch the
Convection Microwave Drawer
• If you are pairing your Convection Microwave Drawer™ Oven for the first time select
your mobile device.
• After completing the following tasks select
SHARP ELECTRONICS CORPORATION
app and sign in. Follow instructions below to connect your
Oven to the Internet, then pair your app to your appliance.
™
IN THE APP
Note: Please turn on Remote Start before pairing your oven.
Press [TIMER/SETTINGS] 3 times and then press [START/+30 SEC] key.
Convection Microwave Drawer
Oven
™
[GET STARTED] on your mobile device.
WI-FI CONNECT GUIDE
SMD2499FS
[Pair a New Oven]
Android
[ALLOW]
• Press
continue pairing.
Oven
™
on
™
to
4