Sharp SMD2499FS Wi-Fi Connect Manual page 3

HOW TO ACTIVATE EASY WAVE OPEN FUNCTION
Note: Easy Wave Open is
EASY WAVE OPEN ON
• Hold on the control panel for 3 seconds. Once enabled,
the white light on the center of the panel will illuminate and the
display will show
• To use the Easy Wave Open function, simply wave your hand
twice in front of the sensor in consecutive motions. This can be
up and down or side to side motions.
EASY WAVE OPEN OFF
• Hold on the control panel for 3 seconds. Once disabled, the white light on the
center of the panel will turn off and the display will show
• When Control Lock is activated, the Easy Wave Open Function is off.
HOW TO CONNECT AND PAIR YOUR APPLIANCE TO THE SHARP KITCHEN APP
Scan this QR code or visit http://www.sharpusa.com/Support.aspx and
search for SMD2499FS on how to connect and pair your appliance to
the Sharp Kitchen App.
1. GETTING STARTED
Sharp Kitchen
• Download the
• Launch the Sharp Kitchen App and sign in or create a Sharp account.
*If you already have a Sharp account, enter credentials and select
If you do not have a Sharp account, select
instructions. A verification email will be sent to your registered email address. Please verify email
SHARP ELECTRONICS CORPORATION
OFF by default
EASY WAVE OPEN
App on the App Store
within 24 hours, otherwise account registration will need to be restarted.
Convection Microwave Drawer
when plugged in.
.
ON
EASY
or Google Play.
®
[SIGN
[CREATE ACCOUNT]
WI-FI CONNECT GUIDE
Location of Easy Wave Open Sensor
WAVE OPEN OFF
IN].
and follow the on-screen
SMD2499FS
Oven
™
.
3