Download Print this page

Advertisement

Quick Links

Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
For Customer Care: +1 (732) 366-1788
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardwares.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Notez s'il vous plaît que l'avertissement sur la table à langer
est exigé par la loi de la CPSC et l'ASTM, qui nous oblige d'in-
former les parents et les personnes en charge des enfants.
Nous nous excusons pour toute inconvenance que cela pour-
rait vous causer.
L'assemblage par un adulte de ce meuble est nécessaire.
Les petites pièces non-assemblées présentent le risque d'étouffement.
Pour vous aider pendant l'assemblage de votre produit, veuillez trouver
en bas des instructions simples, en étape. Avant de commencer
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D'ASSEMBLAGE.
ITEM NO: 642
NUMÉRO DU MODÈLE : 642
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 642 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DOM FAMILY 642

  • Page 1 INSTRUCTIONS D'ASSEMBLAGE. PISCATAWAY TWP NJ 08854 For Customer Care: +1 (732) 366-1788 ITEM NO: 642 NUMÉRO DU MODÈLE : 642 Adult assembly required. Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products.
  • Page 2 l'assemblage, les étapes suivantes sont vivement recommandées : 1. Lisez attentivement les instructions. 2. Identifiez toutes les pièces et les outils. 3. Vous avez besoin des outils suivants : Tournevis cruciforme Tournevis plat Marteau N'utilisez pas d'outils électriques. Pour protéger les pièces pendant l'assemblage, placez-les sur une surface souple.
  • Page 3 WARNING ! · FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. · READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. · UPON COMPLETION OF ASSEMBLY, MAKE SURE ALL SCREWS,BOLTS AND FASTENERS HAVE BEEN SECURELY TIGHTENED.
  • Page 4 MISE EN GARDE ! LE NON-RESPECT DES AVERTISSEMENTS ET DES INSTRUCTIONS D'ASSEMBLAGE PEUT CON- • DUIRE À DES BLESSURES GRAVES OU À LA MORT. LISEZ TOUTES LES INSTRUCTIONS AVANT L'ASSEMBLAGE DU LIT. GARDEZ LE MANUEL POUR • UNE UTILISATION FUTURE. APRÈS AVOIR FINI L'ASSEMBLAGE DU LIT DE BÉBÉ, VÉRIFIEZ QUE TOUS LES ÉCROUS, LES •...
  • Page 5: Component Parts

    HARDWARE AND TOOL DIAGRAM (c) Allen Wrench 1 PC (b) Barrel Nut 18 PCS (a) Bolt 3” 18 PCS (c) Clé Allen 1 PC (b) Écrou manchon 18 PCS (a) Boulon 3" 18 PCS (h) L Metal Plate 2PCS (h) Plaque métallique en L 2PCS (f)Selfdrilling screw 8 PCS (d) Bolt 1-5/8”...
  • Page 6 STEP# 1 STEP# 2 ÉTAPE 1 ÉTAPE 2 (H1) (A2) (H1) (H2) (A1) (H2) Using the bolt (d) and the wood dowel Press the stopper(g) into the bottom (e) to connect the left leg (A1) and right rail (H2) with slat (D), connect the leg (A2) to top rail(G) and middle&...
  • Page 7 STEP# 5 (K1) ÉTAPE 5 Connect the side bar (K1&K2) (K2) to the side bar (L) by wood dowels (j). Connectez la barre latérale (K1 et K2) à la barre latérale (L) en utilisant des goujons en bois (j). STEP# 6 ÉTAPE 6 Connect the side bar (K1&K2) to the side bar (L) by L metal plates (h) and selfdrilling screws (f).
  • Page 8 STEP# 7 ÉTAPE 7 Insert the cross bar (M&N) to the left side bar (K1&L). then attach the split legs (F) to the cross middle bar(M) by bolts (a) and barrel nuts (b). (K1) Insérez la barre transversale (M et N) à la barre latérale gauche (K1 et L).
  • Page 9 STEP# 9 ÉTAPE 9 Connect the headboard Leg (A1) to the left side bar (K1) using bolts (a) and (A1) Barrel Nuts(b).The right side bar (K2) use the same way. (A2) (K1) (K2) Connectez le pied gauche (A1) à la barre latérale gauche (K1) en utilisant des boulons (a) et des écrous manchon (b).
  • Page 10 STEP# 11 ÉTAPE 11 1.Connect left bed rail (C1) to the left side bar (K1) using bolt (d),Then connect the left bed rail (C1) to the headboard leg (A1) by using bolts (a)&(d) and barrel nut (b). 2.Connect right bed rail (C2) to the right side bar (K2) using bolt (d),Then connect the right bed rail (C2) to the headboard leg (A2) by using bolts (a)&(d)
  • Page 11: Limited Warranty

    LIMITED WARRANTY workmanship and agrees to remedy any such defect. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
  • Page 12 1532, S. Washington Avenue Piscataway, NJ 08854 E-mail: info@dreamonme.com Customer Care: +1 (732) 366-1788 www.dreamonme.com Follow us on @dreamonmeinc @dreamonmeinc to get your nursery featured on our social media. Enter our monthly giveaway! Chat with us! Simply scan the QRcode to register. For any questions or concerns or feedback.