Before Using For The First Time; Initial Use; Rinse Aid System; Rinse Aid - Bosch SPE68B55UC User Manual

en-us Before using for the first time
8 Before using for the

Before using for the first time

first time
Apply the settings for the first use.
Before using for the first time
8.1 Initial use
On initial use or after reset to the
factory settings, you will need to
configure settings.
Tip: Connect your appliance to a
mobile device. You can conve-
niently change all settings using
the Home Connect™ app.
→ "Home Connect™ quick start",
Page 31
Requirement: The appliance has
been installed and connected.
Add rinse aid. → Page 20
1.
Switch on the appliance.
2.
→ Page 27
Set the amount of rinse aid.
3.
→ Page 20
Tip: You can change these set-
tings and other Basic settings
→ Page 29 at any time.
9 Rinse aid system

Rinse aid system

You can use the rinse aid system
Rinse aid system
and rinse aid to get dishware and
glasses rinsed perfectly without
spots.
9.1 Rinse aid
For optimum drying results, use

rinse aid.

Only use rinse aid intended for
household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights
up, fill the dispenser with rinse
aid. Only use rinse aid intended
for household dishwashers.
20
Press the catch on the lid of the
1.
dispenser for rinse aid
lift ⁠ .
Add rinse aid up to the max
2.
mark.
If rinse aid spills out, remove it
3.
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the
wash cycle.
Close the lid of the dispenser
4.
for rinse aid.
a The lid clicks into position.
9.2 Setting the amount of
rinse aid
If there are streaks or water spots
on dishware, change the amount
of rinse aid.
Press
1.
To open the basic settings,
2.
press
a The display shows
Press
3.
til the display shows the value
set at the factory 2.
and
2
1
max
⁠ .
for 3 seconds.
⁠ .
repeatedly un-