Download Print this page

Troubleshooting - easymaxx CD-026M/LED Instructions Manual

Daylight table lamp

Advertisement

Available languages

Available languages

EN
WARNING – Risk of Injuries!
Danger of Suffocation! Keep children and animals away from
the packaging material.
Danger of Dazzling! Never look directly into the light beam!
Never aim the light beam directly at other people or animals.
Danger of strangulation! Make sure that the mains cable is
always kept out of the reach of small children and animals.
Danger of falling! Make sure that the connected mains cable
does not present a trip hazard.
Warning of Fire!
Do not use the article in rooms containing easily ignitable dust
or poisonous and explosive fumes.
The lamp may only be set up with a minimum distance of 20 cm
from fl ammable materials such as curtains, etc.
Do not cover the article, for example with cloths or something
similar.
In the event of a fi re: Do not extinguish with water! Smother the
fl ames with a fi reproof blanket or a suitable fi re extinguisher.
NOTICE – Risk of Damage to Material and Property
Make sure that the mains cable is not squashed, bent or laid
over sharp edges and does not come into contact with hot sur-
faces. Do not wrap the mains cable around the article (danger
of the cable breaking).
The article should only be used if it has been completely and
correctly assembled!
Never pull or carry the device by the mains cable.
Protect the article from heat, naked fl ames, extreme tempera-
tures, persistent moisture, wet conditions and collisions.
Use only original spare parts from the manufacturer.
Do not place or lay any heavy objects on the mains cable.
The individual LEDs cannot be replaced.
Items Supplied and Article Overview
Similar to the one shown
Before Initial Use
Remove the foils and transport guards and make sure that the
product contents are complete (see chapter "Product contents and
article overview") and check for any damages from transport. If
you identify damages to the components, do not use them (!), in-
stead contact our customer service centre.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
1 Lamp head
1
2 LED
3 On / Off switch
2
4 Infi nitely adjust-
3
able lamp neck
5 Base
4
5
Customer Service / Importer:
*) Calls subject to a charge. Costs vary depending on the provider.
All rights reserved.
Use
1. Place the article on a dry, even surface.
2. Turn the lamp head (1) to the position you want. The lamp can
be infi nitely adjusted using the fl exible lamp (4) neck.
3. Insert the mains plug into a properly installed plug socket that
is easily accessible.
4. Switch on the article by moving the On / Off switch (3) to the I
position.
5. To switch it off, move the On / Off switch (3) to the 0 position.
Cleaning and Storage
PLEASE NOTE!
Remove the mains plug from the plug socket before cleaning
the article.
Do not use any corrosive or abrasive cleaners to clean the
housing. They could damage the surface. If needed, clean the
housing with a damp, soft cloth.
Clean the article if necessary using a soft, dry cloth.
Store the article in a dry, clean place that is not accessible to
children and animals.

Troubleshooting

If the article does not work properly, check whether you are able to
rectify the problem yourself. If the problem cannot be solved with
the steps that are listed, contact the customer service department.
Do not attempt to repair a defective electrical device
yourself!
Technical Data
Product number:
Model number:
Colour temperature:
Voltage supply:
Power:
Protection class:
Disposal
Dispose of the packaging in an environmentally friendly
manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly manner
at a recycling centre for used electrical and electronic
devices. More information is available from your local
authorities.
+49 38851 314650 *)
3
Instructions
05190
CD-026M / LED
approx. 5500 K
220 – 240 V ~ 50 Hz
12 W
II
Z 05190 M DS V1 0318

Advertisement

loading

This manual is also suitable for:

05190