Download Print this page

Fehlerbehebung; Safety Instructions - easymaxx CD-026M/LED Instructions Manual

Daylight table lamp

Advertisement

Available languages

Available languages

DE
Schäden aufweisen, diese nicht (!) verwenden, sondern den Kun-
denservice kontaktieren.
Anwendung
1. Den Artikel auf eine trockene, ebene Fläche stellen.
2. Den Leuchtenkopf (1) in die gewünschte Position drehen. Mit
dem fl exiblen Leuchtenhals (4) kann die Leuchte stufenlos ver-
stellt werden.
3. Den Netzstecker in eine ordnungsgemäß installierte, gut er-
reichbare Steckdose stecken.
4. Den Artikel einschalten, indem der Ein- / Ausschalter (3) auf die
Position I gestellt wird.
5. Zum Ausschalten, den Ein- / Ausschalter (3) auf die Position 0
stellen.
Reinigung und Aufbewahrung
BEACHTEN!
Vor jeder Reinigung den Netzstecker aus der Steckdose ziehen.
Keine scharfen oder scheuernden Reinigungsmittel oder Reini-
gungspads verwenden. Diese können die Oberfl ächen beschä-
digen.
Den Artikel bei Bedarf mit einem weichen, trockenen Tuch
reinigen.
Den Artikel an einem trockenen, sauberen sowie für Kinder
und Tiere unzugänglichen Ort aufbewahren.

Fehlerbehebung

Sollte das Gerät nicht ordnungsgemäß funktionieren, überprüfen,
ob ein Problem selbst behoben werden kann. Lässt sich mit den
genannten Schritten das Problem nicht lösen, den Kundenservice
kontaktieren.
Nicht versuchen, einen defekten elektrischen Artikel
eigenständig zu reparieren!
Sollte sich der Artikel nicht einschalten lassen, Folgendes
überprüfen:
Steckt der Netzstecker richtig in der Steckdose? Den Sitz des
Netzsteckers korrigieren.
Ist die Steckdose defekt? Andere Steckdose ausprobieren.
Die Sicherung des Netzanschlusses überprüfen.
Technische Daten
Artikelnummer:
Modellnummer:
Farbtemperatur:
Spannungsversorgung:
Leistung:
Schutzklasse:
Entsorgung
Das Verpackungsmaterial umweltgerecht entsorgen und
der Wertstoffsammlung zuführen.
Den Artikel umweltgerecht an einem Recyclinghof für
elektrische und elektronische Altge räte entsorgen. Nähere
Informationen sind bei der örtlichen Gemeindeverwaltung
verfügbar.
Kundenservice / Importeur:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin,
Deutschland •
*) 0 - 30 Ct. / Min in das dt. Festnetz. Kosten variieren je nach Anbieter.
Alle Rechte vorbehalten.
05190
CD-026M / LED
ca. 5500 K
220 – 240 V ~ 50 Hz
12 W
II
+49 38851 314650 *)
Product number: 05190
Dear Customer,
We are delighted that you have chosen this daylight table lamp.
If you have any questions about the article and about spare parts/
accessories, contact the customer service department via our
website:
www.service-shopping.de
Note: The illustrations used in these instructions may differ slightly
from the actual article.
Explanation of Symbols
Danger symbols: These symbols indicate
dangers of injury. Read through the associated
safety instructions carefully and follow them.
The lamp may only be set up with a minimum distance of
20 cm from fl ammable materials.
Protection class II
Read operating instructions before use!
Explanation of the Signal Words
WARNING
warns of possible serious injuries and danger
to life
CAUTION
warns of slight to moderate injuries
NOTICE
warns of damage to property
Intended Use
The article is only intended to be used for lighting in dry indoor
spaces. It is not suitable for use in damp rooms, e.g. bath-
rooms.
The article may not be used for the direct irradiation of people,
animals or plants.
The article is not a toy!
The article is designed for personal domestic use only and is
not intended for commercial applications.
The article should only be used as described in these instruc-
tions. Any other use is deemed to be improper.
The following are excluded from the warranty: all defects
caused by improper handling, damage or unauthorised at-
tempts at repair. This also applies to normal wear and tear.

Safety Instructions

DANGER – Danger of Electric Shock from Water!
Never immerse the aricle, mains cable or plug in water or other
liquids and ensure that they cannot fall into water or become
wet.
Should the article fall into water, switch off the power supply
immediately. Do not attempt to pull the article out of the water
while it is still connected to the mains power!
Never touch the article, mains cable or mains adapter with wet
hands when these components are connected to the mains
power.
WARNING – Danger of Electric Shock from
Damage and Inappropriate Use!
Only connect the article to a plug socket with safety contacts
that is properly installed and matches the technical data of the
article. The plug socket must also be readily accessible after
connection so that the connection to the mains can quickly be
isolated.
Only use suitable extension cables whose technical data is the
same as that of the article.
Remove the mains plug from the plug socket if a fault occurs
during operation or before a thunderstorm.
When you pull it out of the plug socket, always pull on the
mains plug and never the mains cable!
2
EN

Advertisement

loading

This manual is also suitable for:

05190