Advertisement
Available languages
Available languages
Use
ATTENTION
•
Please keep in mind that the consumption of alcohol al-
ways impairs your responsiveness and judgement! Even if
the device does not detect any alcohol or only a low level
after alcohol consumption, you may not, drive a vehicle,
operate a machine or perform an action, which, when
performed under the infl uence of alcohol, could endanger
yourself or other persons!
•
Please keep in mind that improper handling or manipula-
tion of the device may cause it to display lower alcohol lev-
els. No guarantee is offered for any of the measurements
taken with this device!
•
Please keep in mind that alcohol affects different per-
sons differently. Depending on height, body weight,
age and health, the effects of the same blood alcohol
level may vary from person to person.
After the measurement, the device will display the
calculated BAC in grams per litre and per cent. BAC
stands for "blood alcohol content" as calculated
by the device. Example: "0.3 g/l (or 0.03 % BAC)"
corresponds to an alcohol content of 0.3 g per litre
of blood. NOTICE: The actual BAC may differ from
the value shown!
1. Use a dry cloth to wipe the sensor to remove any con-
tamination that could affect the test result.
2. Push the Power button until you hear a signal tone.
The display will switch on.
3. A "Warm up" countdown from 10
4. After the "Warm up", the "Blow"
5. During the "Blow" countdown,
6. The "Caution" icon will appear
7. The "Danger" icon will appear
8. The device will automatically switch off after a few sec-
onds. A signal will sound when the device switches off.
to 0 will appear on the display.
Wait until the countdown is com-
plete. A signal will sound once
the countdown is complete.
icon will appear on the display. A
new countdown from 10 to 0 will
appear. The alcohol concentra-
tion in your breath can be meas-
ured during this countdown.
hold the sensor up to your mouth
and blow forcefully into the sen-
sor for approx. 3 – 5 seconds.
if blood alcohol levels of 0.02 %
BAC (or 0.2 g/l) to 0.05 % BAC
(or 0.5 g/l) are detected.
if a blood alcohol level of 0.05
% BAC (or 0.5 g/l) and above is
detected.
Tips / notes:
•
At least 20 minutes should have passed since you last
consumed alcohol and before the current measure-
ment. Do not eat, smoke or drink during this time.
•
Closed, poorly ventilated rooms as well as air-condi-
tioned rooms may affect the accuracy of the reading. If
necessary, measure your BAC 2 – 3 times.
•
Saliva and alcohol on the sensor may affect the accu-
racy of the measurements. Use a dry cloth to clean the
sensor/device every time after use.
•
If you have not used the device for a prolonged period
of time (or before fi rst use), you must perform 2 – 3 test
measurements before you perform the actual meas-
urement.
•
Wait approximately 2 – 3 minutes between two meas-
urements.
•
Low batteries may affect the accuracy of measure-
ments. Change the batteries when you notice that the
battery power is diminishing.
Technical data
Model:
PFT-642
Voltage supply:
3 V DC (2 x 1.5 V battery, type AAA)
Measurement range: 0.00 – 0.19 % BAC or 0.0 – 1.9 g/l
Measuring tolerance: 0.01% BAC (0.1 g/l)
Warm-up phase:
approx. 10 seconds
Storage conditions:
Temperature range from 0 to 40 °C
Operating conditions: Temperature range from 0 to 40 °C
Sensor:
Semiconductor sensor
Disposal
The packaging material is recyclable. Dispose of
the packaging in an environmentally-friendly
manner and make it available to the collection
service for recyclable materials.
Dispose of the product in an environmentally-
friendly manner. The product does not belong in the
household garbage. Dispose of it at a recycling
centre for old electric and electronic equipment. For
more information, please contact the administration
in your community.
Rechargeable batteries and batteries must be
removed and disposed of separately before
disposing of the product. To protect the environment,
batteries and rechargeable batteries may not be
disposed of together with normal household waste.
Instead they must be turned in at appropriate
collection points. Please also observe applicable
statutory provisions regulating the disposal of
batteries.
Customer service / importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin,
Germany
Tel.: +49 (0) 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
Z 08165_V1_08_2015
Advertisement
