Advertisement
M131
18. Table clamp of Model 270C can be assembled by first installing
the top bearing (B255) and bottom bearing (B258) and secure
using two screws (S364) each. Slide the housing and base
assembly (A294) into the table clamp. Install two plungers (P297)
and two bearings (P313) into the two screw holes in the table
clamp and screw in until the housing assembly will not descend
faster than one inch per second. Cover the threaded bushing with
caps (C255). Install brass bearing (B271) and knob (K053) into
the bushing in the front of the tube. The assembly is ready for
final inspection and testing. Test can openers according to test
procedure EC01062A.
115V 270C
12
Advertisement
