Bluetooth; Connection - Silvercrest SBL TW3 A1 Operation And Safety Notes

˜ Establishing a Bluetooth

connection:

Remove all plugs from the AUX-in jack 1
before you attempt to establish a Bluetooth
connection .
Switch on the playback device and make
sures its Bluetooth
On the product press and hold the
6 for 2 seconds until the LED 5 flashes
white and a signal tone sequence sounds .
The product will now attempt to connect to
the playback device (e .g . smartphone or
computer) .
The product identification on the playback
device will be "SBL TW3 A1" . On the
playback device "ACCEPT" the connection .
Please note the requirements of the software
on the playback device .
66 GB/IE
mode is on .
®
®
®
button