Known Interfering Substances - UNISENSE SULFILOGGER User Manual

SulfiLogger™
sensor
Environment
Range
Max pressure
Input power
Output data
Mounting
Technical specifications common for all sensors:
Accuracy
Response time (t90)
Detection limit
Operating humidity range
Design temperature range
Operating temperature range
Mechanical specifications common for all sensors:
Length
Diameter
Weight
Material
Warranty
K
NOWN INTERFERING SUBSTANCES
Below is a list of chemicals that has been tested against the sensor.
The table shows where interference's has been found and to which
extend they interfere. This list is also available online:
www.sulfilogger.com/technology
S1-1010-
5mgL
Wastewater
0-5 mg/L
10m
Battery
Logged data
Free hanging or
Wall mounted
Ø48.3mm / 1 ½" pipe
Stainless Steel - EN 1.4404 (316L)
S1/X1-1020-
5mgL
Wastewater
0-5 mg/L
10m
20 to 30 V
RS-232 or
4-20 mA
Free hanging or
Wall mounted
-20 C to +60 C ( -4 F to +140 F)
0 C to +40 C ( 32 F to +104 F)
240 mm
0.85 kg
3 months
18
S1/X1-1120-
5mgL or
1000ppm
Pressurized
wastewater
or gases
0-5 mg/L
3 barg
20 to 30 V
RS-232 or
4-20 mA
In-line or
Flow cell
+/- 5% of full range
<25 seconds
1% of full range
0-100%
X1-1220-
1000ppm
Pressurized
gases
0-1000 ppm
10 barg
20 to 30 V
RS-232 or
4-20 mA
In-line or
Flow cell