Router Mode Function; Physical Interface Specification; Ip Address - NEC ZA-SA3500G Function Manual

3.6. Router Mode Function

This product is an IPv4 router.
[Note]
As compared to a common router device, this product can distinguish its uplink and downlink interfaces.
Connect the WAN port of this product to the Internet and the LAN port to the local area.

3.6.1. Physical Interface Specification

The IP address is managed in synchronization with link-up and link-down of the physical interface.

The IP address to be used in this product's maintenance function is acquired in the link-up of either Ethernet in
WAN/LAN interface and released when all are link-down.
This product's link-down detection timing interface is immediate


3.6.2. IP Address

IP address of this product is as follows.
Interface IP Address
WAN Set by using either of the following methods.
Fixed setting (Through Web setting)

Acquired by the DHCP client function

Acquired by the PPPoE function

LAN 192.168.110.1/24 is set as the initial value.
Can be changed through Web setting.
Device IP 169.254.254.11/16
Remarks
Among the maintenance functions of
this product, functions that need to
communicate with a server over the
Internet can operate using the WAN
interface IP address.
LAN and wireless LAN interfaces are
common.
Dedicated IP addresses for accessing
this product.
|Function Specification 95