Download Print this page

Inovonics D-TECT GJD1030 Installation Manual

Wireless

Advertisement

Quick Links

GJD1030 D-TECT Inovonics
The D-TECT Inovonics MUST be learnt to the control panel/receiver BEFORE it is mounted in its final location. Please
see page 4 of this manual and the Inovonics manual for details.
1
3
5
Page 1 of 4
Installation Manual
© 2013 GJD Manufacturing Limited.
All rights reserved.
®
Enabled Wireless
2
4
6
1.Batteries
October 2013 Rev 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the D-TECT GJD1030 and is the answer not in the manual?

Questions and answers

Summary of Contents for Inovonics D-TECT GJD1030

  • Page 1 GJD1030 D-TECT Inovonics Enabled Wireless Installation Manual The D-TECT Inovonics MUST be learnt to the control panel/receiver BEFORE it is mounted in its final location. Please see page 4 of this manual and the Inovonics manual for details. 1.Batteries Page 1 of 4 ©...
  • Page 2 Page 2 of 4 October 2013 Rev 1...
  • Page 3 Note: The Inovonics transmitter is supplied with the ES link disabled. If this is required then the transmitter module will Packaging need to be removed to enable the link then replaced. The package contains: Ensure the detector's field of view is unobstructed.
  • Page 4 The shutters are clipped to the pan and tilt module as shown in Walk test mode ends automatically five minutes after the last Figure 5. Each vertical section of the Fresnel lens gives a detection. coverage pattern of approximately 10 degrees. Do not conduct walk tests with the cover removed.