Ciara Orion HF-210 User Manual page 50

CPU Q-Fan Control [Disabled]
[Disabled] Disables the CPU Q-Fan control feature.
[Enabled] Enables the CPU Q-Fan control feature.
CPU Fan Speed Low Limit [600 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set the CPU fan
warning speed in case the fan stops working.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM].
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the appropriate performance
level of the CPU fan.
[Standard] The CPU fan will automatically adjust depending on the CPU temperature
[Silent] Minimizes the fan speed for quiet CPU fan operation
[Turbo] Achieves maximum CPU fan speed
[Manual] Users can assign detailed fan speed control parameters
CPU Upper Temperature [70] (in Celsius)
Use the <+> and <-> keys to set the upper limit of the CPU temperature. The values range from 20°C to 75°C. When the
CPU temperature reaches the upper limit, CPU fan will operate at maximum duty cycle in full speed.
CPU Fan Max. Duty Cycle (%) [100]
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from 0% to 100%. The minimum
value cannot be lower than the setting of the Min. Duty Cycle.
CPU Lower Temperature [20] (in Celsius)
Displays the lower limit of the CPU temperature. Users can set the CPU Fan Min. Duty Cycle when CPU temperature is lower
than the CPU Lower Temperature setting.
CPU Fan Min. Duty Cycle (%) [20]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 0% to 100%. When the CPU
temperature is under 20°C, the CPU fan will operate at the minimum duty cycle.
REAR Fan 1 Q-Fan Control [Disabled]
[Disabled] Disables the REAR Q-Fan control feature.
[Enabled] Enables the REAR Q-Fan control feature.
REAR Fan 1 Fan Speed Low Limit [600 RPM]
This item appears only when you enable the REAR Fan 1 Q-Fan Control feature and allows you to disable or set the chassis
fan warning speed in case the fan stops working.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM].
50 Chapter 3: Configuration / Setup