Klarstein 10035472 Manual page 60

EN
60
Inserting the oven door
Replace the oven door in the reverse order.
1. When inserting the oven door, make sure that both hinges are positioned directly on
the installation holes of the front panel. Make sure that the hinges are installed in the
correct position. It must be possible to insert them easily and without resistance. If
any resistance is felt, make sure that the hinges are in the correct holes.
2. Open the oven door completely. When opening the oven door, you can check
again that the hinges are in the correct position. If you have inserted the hinges
incorrectly, it will not be possible to open the oven door fully. Close the two locking
levers.
3. Close the oven door. It is recommended that you recheck that the oven door is
correctly positioned and that the ventilation openings are not half closed.