Table of Contents
Advertisement
Parameter
System Sleep
Timer
Sleep Mode
Power Switch < 4
sec.
System Wake-up
Event
Modem Ring
Indicator
PCI Power
Management
RTC Alarm
Resume Day
Description
Automatically puts the
system to power-saving mode
after a specified period of
inactivity. Any keyboard or
mouse action, or any activity
detected from the IRQ
channels resumes system
operation.
Lets you specify the power-
saving mode that the system
will enter after a specified
period of inactivity. This
parameter is configurable
only if the System Sleep
Timer is enabled.
Lets you specify whether to
automatically turn off the
machine or put the system to
Suspend mode when the
power switch is pressed for
less than 4 seconds.
Lets you specify the activity
that will resume the system to
normal operation.
Wakes the system from Sleep
mode once any fax/modem
activity is detected.
Allow the system to be
awaken by PME function.
Set system wake up time.
If the RTC alarm is enabled,
set date for the system to
wake up.
Options
2, 5, 10, 15, 20,
30, 40, 50...120
minutes, or Off
Standby or
Suspend
Power Off or
Suspend
Enabled or
Disabled
Enabled or
Disabled
Enabled or
Disabled
Day 1-31
57
Advertisement
Table of Contents
