Table of Contents
Advertisement
34
Chapter 2
System Board Information
Floppy Disk/Hard Disk Support
The board comes with an enhanced PCI IDE controller that supports
PIO mode 4 and Ultra DMA (Direct Memory Access) mode data
transfers. Two PCI IDE interfaces are mounted on the board to
enable the system to support a maximum of four IDE hard disks, or
any other IDE devices. See "Jumpers and Connectors" on page 31 for
the location of the IDE interfaces.
Connect the cables according to the IDE hard disk configuration listed
in the table below. Follow the instructions in the housing installation
manual on how to install a hard disk in the system.
IDE Connector
Master
IDE 1 (CN8)
Hard disk 0
IDE 2 (CN7)
Hard disk 2/IDE CD-
ROM
Slave
Hard disk 1
Hard disk 3
Advertisement
Table of Contents
