Table of Contents
Advertisement
Parameter
Boot Sequence
Silent Boot
Display
Configuration Data
Swap Floppy Drive
Boot Up Floppy Seek
Description
This parameter allows you to
specify the system boot up
search sequence. The hard
disk IDs are listed below:
C: Primary master
D: Primary slave
E: Secondary master
F: Secondary slave
LS: LS120
Zip: IOMEGA ZIP Drive
This item is used to decide if
the Aspire logo displays when
the system boots up.
This item is used to decide if
the configuration table
displays when the system
boots up.
This item allows you to swap
floppy drives. For example, if
you have two floppy drives (A
and B), you can assign the
first drive as drive B and the
second drive as drive A or
vice-versa.
When enabled, the BIOS
issues the seek command to
the floppy drive during POST
to move the floppy drive head
forward and backward.
Format/Options
C,A,CDROM
A,C,SCSI
C,A,SCSI
C,CDROM,A
CDROM,C,A
CDROM,A,C
D,A,SCSI
E,A,SCSI
SCSI,A,C
SCSI,C,A
C only
LS/ZIP,C
Enabled
Disabled
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
45
Advertisement
Table of Contents
