Tersano iClean mini Instructions

iClean iClean mini mini
™
PREPARATION PREPARATION
IMPORTANT: IMPORTANT:
Familiarize yourself
with your new
iClean mini.
Your iClean mini
Activation Button
kit includes:
– iClean mini
device
– USB charging
cord
– Instruction sheet
– Gift box
CHARGE CHARGE
RED
Charging takes up to
The charging port is located on the back of the
–
iClean mini.
Connect the USB charging cord to the device.
–
– Plug the other end of the charging cord into a
USB outlet or through a USB power adapter
(not included) then into a standard electrical
outlet.
A slowly flashing red light on top indicates
–
charging is taking place.
Charging is complete when a blue light
–
on top flashes.
Unplug the charging cord from the outlet
–
and disconnect the charger from the iClean.
Note: If iClean mini does not operate when
activation button is pressed, the iClean mini needs
to be recharged. iClean mini will not operate during
the charging process.
PRODUCT DESCRIPTION PRODUCT DESCRIPTION
iClean mini Aqueous ozone
Model LQFC200
Battery 7.4V Li-ion
Connect to USB outlet/
USB Charging Cord
adapter 5VDC, ≥1A
85 x 63 x 230mm
Dimension
Charging Time Up to 3 hours
FILL FILL
Indicator light
Spray nozzle
Charging port
Waterpipe
– Turn reservoir on base counter-clockwise and
Water level
remove from iClean mini.
Window
Water tank
– Fill reservoir with cold tap water ONLY.
Reattach reservoir to iClean mini and turn
–
clockwise to fasten tightly.
Fill with tap water ONLY.
–
– Do NOT add chemicals or soap.
– Do not submerge under water.
3
hours
USE USE
INDICATORS INDICATORS
3 hours.
– When activation button is pressed, a
continuous blue light on top indicates
USB Charging Cord
iClean mini is producing aqueous ozone.
A continuous red light on top indicates
–
reservoir is empty.
CLEAN CLEAN
Press activation button on front of iClean mini to
–
wet surface to be cleaned.
Wipe surface dry with a cotton, microfiber, or
–
paper textile.
Note: no need to wipe completely dry – residual
water will evaporate without streaking.
Colour
Water Quality
Water Temperature
Net Weight
Tank Capacity
Water Concentration
O
³
Powered by
READ THESE INSTRUCTIONS COMPLETELY.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SANITIZE SANITIZE
–
–
–
–
CARE CARE
RECHARGING RECHARGING
–
–
MAINTENANCE MAINTENANCE
To maintain consistent performance, follow these
care instructions.
–
–
–
–
–
–
STORAGE STORAGE
–
–
–
–
Dark blue
Clean tap water
4-40°C
300g
150ml
up to 1.7 ppm
QUESTIONS OR CONCERNS QUESTIONS OR CONCERNS
Contact Tersano at 800-727-8835 or +1 519 737 7588
IMPORTANT SAFETY INSTRUCTIONS.
Kill germs only on hard, non-porous surfaces.
Clean surface with the iClean mini.
Press button and continuously spray
surface with aqueous ozone.
Wipe surface dry with any clean cloth.
It is not necessary to drain battery
completely before recharging.
ONLY use charger supplied with iClean
mini kit.
Empty reservoir at the end of each day.
With empty reservoir attached, press
activation button for 5 seconds to clear excess
water.
When iClean mini has not been used for more
than 5 days, fill reservoir completely, press
activation button, and spray until reservoir is
empty. Then refill reservoir and iClean mini is
ready for use again.
Use only attachments and replacement parts
sold or recommended by manufacturer.
iClean mini is NOT dishwasher safe.
iClean mini is not a toy. Supervision
required when children present.
Empty water from reservoir.
Store upright at room temperature.
Do not dispose of device or battery in house-
hold trash. Dispose of properly.
Contact Tersano with questions.
Store upright and indoors above 40°.
Product may vary slightly from illustrations
enclosed in this use and care guide.
CAUTION CAUTION
For first time usage, charge for 4 hours
–
and then spray at least one tank of water
to activate the unit in order to achieve the
normal concentration value of O ³ water.
– Do not spray directly into the eyes.
– Avoid flushing the unit with water.
with questions or concerns about your iClean mini.