Advertisement
Quick Links
iClean
iClean
mini
mini
™
TROUBLESHOOTING
1. No water spraying ................................................................................................................................. 1
2. LED is illuminating red when attempting to spray .................................................................................. 2
3. iClean mini spray is weak ...................................................................................................................... 2
4. iClean mini not charging, but plugged in ................................................................................................ 2
5. Plastic cover is peeling from press button ............................................................................................. 3
1. NO WATER SPRAYING
Reason: air or sediment blockage inside blue peg at the base of iClean mini.
1. Remove reservoir by turning counter-clockwise until the base detaches (#1).
2. Remove the water hose or iClean mini SAO mini cartridge from the blue peg (#2).
3. Tip the iClean mini down to remove excess water, then blow into the blue peg shown in (#3) to disengage and
release air bubble or sediment that may be clogging the peg.
4. Slide the water hose or SAO mini cartridge back onto blue peg and fill reservoir with cold water.
5. Reattach reservoir clockwise until base clicks in place.
6. Press spray button and test.
1
2
3
Updated: June 25, 2020
1-800-727-8835
www.tersano.com
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tersano iClean mini
Summary of Contents for Tersano iClean mini
- Page 1 2. Remove the water hose or iClean mini SAO mini cartridge from the blue peg (#2). 3. Tip the iClean mini down to remove excess water, then blow into the blue peg shown in (#3) to disengage and release air bubble or sediment that may be clogging the peg.
- Page 2 4. ICLEAN MINI NOT CHARGING, BUT PLUGGED IN 1. Locate the charging port on the back of the iClean mini; it is a small hole just above the reservoir. 2. Proceed in this order: plug the adaptor in to your wall outlet then plug the cord into the charging port on the back of your iClean mini.
- Page 3 STEP 3: REPLACE THE FACEPLATE 1. Lift up the black o-ring from nozzle. 2. With the new faceplate, align edge to o-ring. 3. Snap faceplate back onto iClean mini body and reattach reservoir. 1-800-727-8835 www.tersano.com...
Need help?
Do you have a question about the iClean mini and is the answer not in the manual?
Questions and answers