Volkswagen Golf Owner's Manual page 26

— To close it, touch .
Editing route guidance
To edit route guidance, move the stopovers or the
destination to TripView.
1. Hold the desired destination until it is visibly
highlighted.
2. Move the destination into the desired position.
3. Remove your finger from the screen. The route
will be recalculated.
Bypassing traffic reports
The route plan displays current traffic reports when
navigation data is available. Bypass traffic reports by
editing the route plan → page 211, Traffic informa-
tion.
1. Touch a traffic report.
2. Touch . The route will be recalculated.
Bypass
Additional window
If you use any navigation functions, an additional
window with further options may appear. The possi-
ble options depend on the function used.
Closing the additional window
— Touch a free area outside the additional window.
— OR: Touch .
Functions in the additional window:
Display the selection on the map.
Display on map
Add a stopover to the route guidance.
Add stopover
Start direct route guidance.
Direct route
Delete stopover from the route guidance.
Delete
Bypass traffic congestion. The route will be
Bypass
recalculated.
End the current route guidance.
Stop route guidance
Close the additional window.
Add a destination to favourites.
Learning usage patterns
While travelling, the navigation saves the routes
travelled and destinations arrived at in order to cre-
ate suggested destinations automatically. Destina-
tions are learned depending on the time of day and
the day of the week.
The navigation system can suggest up to five routes
at the same time. The suggested routes may differ
from the routes used in normal route guidance.
Route guidance begins when one of the suggested
routes is selected.
The route guidance follows the selected route until
the vehicle deviates from it. The route is recalcula-
ted and will guide you back to the selected route via
a direct alternative.
212 Infotainment
Serious traffic congestion is taken into account in
the route guidance and, if an alternative route is
available, avoided if navigation data is available.
You can activate or deactivate the function at any
time.
Activate and deactivate learning usage patterns
The setting can be found in the relevant navigation
menu
Basic function settings
— To activate the function, activate
.
pattern
— To deactivate the function, deactivate
.
pattern
— To delete saved data, touch
360° range display.
For hybrid and electric vehicles, the 360° range dis-
play shows the possible range with the current
charge level of the high-voltage battery.
Activating the 360° range display
— Touch
Mobile phone interface
Introduction to the topic
You can connect your mobile phone to the Infotain-
ment system via the telephone interface and then
use the Infotainment system to control the tele-
phone functions. Sound is played back using the via
the vehicle loudspeakers.
You can connect up to two mobile devices to the In-
fotainment system simultaneously. Only one device
is active and can be used to make calls.
You can use the second connected device to receive
calls via the Infotainment system and for media
playback.
High speeds, poor weather and poor road condi-
tions, loud noise levels (also outside the vehicle) and
also network quality may impair telephone calls in
the vehicle.
As a general rule, a device (e.g. mobile phone)
must only be paired once. The Bluetooth or
Wi-Fi connection with the device can be restored at
any time without having to pair the device again.
.
Learn usage
Learn usage
.
Delete usage pattern