Volkswagen Beetle 1998-2010 Master Sheet

Volkswagen Beetle 1998-2010 Master Sheet

Advertisement

IMPORTANT
Before starting, compare items on your invoice with items received.
Carefully check through packaging material. If any item is missing,
please call Crutchfield Technical Support at 1-800-955-9094.
Although reasonable attempts are made to verify the accuracy of the information contained in this MasterSheet, it is presented without
warranties or guarantees of any type due to the constantly changing nature of this type of information and running changes in vehicle
Inside...
production. Any person or entity using this information does so at his or its own risk. If you find our instructions are different from your
vehicle, or if you have questions, do not continue with your installation. Contact our toll-free technical support for assistance.
Page
2
Factory Radio Removal
3
Receiver Installation
(w/o trim ring)
4
Receiver Installation
(with trim ring)
5
Door Speakers
6
Rear Speakers
(Coupe)
7-8
Rear Speakers
(Convertible)
Tools Required
TM


VW Radio
Phillips
Removal Tools
Screwdriver
* If you need additional wiring information,
visit us online at www.crutchfield.com/support/faq.html

Small Flat Blade
Panel Tool
Screwdriver
1998-2010
Volkswagen Beetle
tamper-proof
Drill, 1/8", 3/8" Bits
10mm Socket,
T15
T20
Nail Punch
Ratchet & Extension
Torx Drivers
055 0005
Revision 10/16/12
*0000550005*
6mm Allen Wrench
R
Copyright 2012 Crutchfield Corporation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Beetle 1998-2010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Volkswagen Beetle 1998-2010

  • Page 1 055 0005 Revision 10/16/12 1998-2010 Volkswagen Beetle IMPORTANT Before starting, compare items on your invoice with items received. Carefully check through packaging material. If any item is missing, please call Crutchfield Technical Support at 1-800-955-9094. *0000550005* Although reasonable attempts are made to verify the accuracy of the information contained in this MasterSheet, it is presented without warranties or guarantees of any type due to the constantly changing nature of this type of information and running changes in vehicle Inside...
  • Page 2: Technical Support

    055 0005 Factory Radio Removal 1. Before proceeding, eject discs from factory unit if present. 2. Set parking brake and disconnect negative battery cable to prevent any electrical short. 3. Insert VW radio removal tools into slots in each side of factory radio face as shown.
  • Page 3: Receiver Installation

    055 0005 NOTES: Please read first • Inspect factory receiver harness connector in vehicle. Receiver Installation Ensure that the wiring adaptor received from Crutchfield (without trim ring) plugs into the vehicle’s connector. If the connector is missing or incorrect, please call our Technical Support Department at 1-800-955-9094.
  • Page 4 055 0005 NOTES: Please read first • Inspect factory receiver harness connector in vehicle. Receiver Installation Ensure that the wiring adaptor received from Crutchfield (with trim ring) plugs into the vehicle’s connector. If the connector is missing or incorrect, please call our Technical Support Department at 1-800-955-9094.
  • Page 5: Safety Check

    055 0005 NOTES: Please read first Door Speakers • Instructions show factory size speakers or speakers with adaptor brackets only. Cutting or fabrication (not Note: Door panel for 2003- models shown) will be required for other speaker sizes. is slightly different in appearance, but removal steps are the same as 1998- model shown.
  • Page 6 055 0005 NOTES: Please read first Rear Speakers -- Coupe • Instructions show factory size speakers or speakers with adaptor brackets only. Cutting or fabrication (not shown) will be required for other speaker sizes. 1. Pry around sides and bottom of rear side panel to release six (6) plastic retaining clips and one (1) metal retaining clip in scuff plate. Lift rear side panel and remove (Figure 1).
  • Page 7: Continued On The Next Page

    055 0005 NOTES: Please read first Rear Speakers -- Convertible • Instructions show factory size speakers or speakers with adaptor brackets only. Cutting or fabrication (not shown) will be required for other speaker sizes. 1. Open convertible top. FIGURE 2 2.
  • Page 8 055 0005 Rear Speakers -- Convertible (continued) 8. Pry out bottom front edge of rear side panel (near scuff plate) to release retaining clip (Figure 3, previous page). FIGURE 5 9. Pry out rear edge of rear side panel to release retaining clips. 10.

Table of Contents