Abit AL8 User Manual page 70

E-4
Option 2
Delete RAID set
This item allows you to remove a RAID Array
on this onboard Serial ATA RAID controller.
NOTE: After you have made and confirmed
this selection, all the data stored in the hard disk
will be lost. (The entire partition configuration
will be deleted too.)
Option 3
Rebuild Raid1 set
This item allows you to rebuild only "Raid1"
RAID set.
You need to check which hard disk is the source
disk and which one is the destination disk when
you decide to rebuild the RAID set.
Option 4
Low Level Format
This item allows you to do the "Low Level
Format" for each single HDD one at a time.
Option 5
Logical Drive Info
This item displays the drive information of the
RAID type you had built.
AL8 Series
Appendix E