Configuring The Boot Priority For Devices; Exiting The Bios Configuration Utility - Oracle MICROS Express Station 4 Series Setup Manual

Table 9-3
Setting
Casework Open Actions
To access the Casework Open Actions
settings, tap the Casework option on the
BIOS System Configuration Utility Home
screen.
Secure Boot Configuration
To access Secure Boot Configuration settings,
tap the Security option on the BIOS System
Configuration Utility Home screen.
TPM Configuration
To access TPM Configuration settings, tap
the Advanced option on the BIOS System
Configuration Utility Home screen, tap System
Setup, tap the Security Configuration option,
and then select an option from the TPM
Device drop-down list.
Disable unused Express Station ports
To disable unused ports on the Express
Station, tap the Workstation option on the
BIOS System Configuration Utility Home
screen, and then tap a port in the list of
options.

Configuring the Boot Priority for Devices

From the BIOS Home screen, tap Boot.
1.
For touchscreen Express Stations, drag and drop to reorder the priority list for boot
devices. For non-touchscreen Express Stations, left-click and hold the icon while using
the mouse pointer to move it up or down in the list. The BIOS reads the devices from
top to bottom in determining the method for booting into the operating system.

Exiting the BIOS Configuration Utility

On the Exit tab, select one of the following options:
• Exit Saving Changes: Save the current configuration settings, exit the
configuration utility, and boot into the operating system.
• Exit Discarding Changes: Discard any changes made in this session, exit the
configuration utility, and boot into the operating system.
• Load Setup Defaults: Load the standard default values.
(Cont.) Other BIOS Security Settings
Configuring the Boot Priority for Devices
Description of Option
Select the action taken by the system if the
Express Station casework is compromised:
• Startup Warning: Presents a warning
during startup if the system detects the
Express Station casework was
compromised.
• Forced Off: Turns off the Express Station
if the system detects the casework was
compromised.
• None: Disables Casework Open actions.
Disabled by default. To enable, set
the Supervisor Password on the Account's
Password Status screen under the Security
option.
TPM is disabled by default. To enable TPM,
select PTT (TPM) from the TPM Device drop-
down list.
Select Disable from the drop-down list to
disable a port.
Note: All ports are enabled by default.
Disabling unused Express Station
ports prevents unauthorized copying of
sensitive data and can reduce the Express
Station's likelihood of becoming infected with
viruses or other malware.
Chapter 9
9-4