Advertisement
Quick Links
Model: PEL01340 and PEL01341
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
The lamp is rated at IP55 for external use.
WHAT'S INCLUDED
•
Lamp assembly.
•
User manual.
•
Pack of screws and wall plugs.
POSITIONING
•
The lamp is suitable for mounting on plasterboard, wood or masonry surfaces.
•
It should be mounted at approximately 1.5metres above the ground for best
performance of the motion sensor.
•
Before drilling any fixing holes, check that there are no hidden obstructions behind
the mounting surface such as pipes or cables.
INSTALLATION
•
Remove the lens by prising it away using a flat blade screwdriver.
•
Offer the lamp to the surface and mark the location of the fixing holes.
•
Drill the wall if required, fit the wall plugs then attach the lamp using the screws
provided.
•
Switch the lamp on using the slide switch then refit the lens.
Fence Lights
1
Advertisement
Related Manuals for Pro-Elec PEL01340
Summary of Contents for Pro-Elec PEL01340
- Page 1 Fence Lights Model: PEL01340 and PEL01341 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • The lamp is rated at IP55 for external use. WHAT’S INCLUDED •...
- Page 2 OPERATION • Allow at least 8hrs for the battery to fully charge initially. • The lamp will illuminate for approximately 30 seconds if it detects motion presence or sound of voices in close proximity. CLEANING & MAINTENANCE • Clean the unit only with a soft dry cloth. Do not use any chemicals, abrasives or solvents that could damage the casing or lens.