Advertisement
Quick Links
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
The lamp is constructed to IP65 suitable for external use.
WHAT'S INCLUDED
•
Lamp assembly x 4.
•
User manual.
INSTALLATION
•
Installation is simply embedding the spike in the ground
ensuring the solar panel is exposed for maximum charging
efficiency but not in the vicinity of other strong light source or
the low light illumination may not function.
•
Remove the top cap by turning the lens then lift it off.
•
Remove the insulating tab from the battery.
Stainless Steel Solar Path Light
Model: PELL0263
1
Advertisement
Related Manuals for Pro-Elec PELL0263
Summary of Contents for Pro-Elec PELL0263
- Page 1 Stainless Steel Solar Path Light Model: PELL0263 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • The lamp is constructed to IP65 suitable for external use.
- Page 2 OPERATION • Allow at least 8hrs for the battery to fully charge initially. NOTE: the lamp does not light except in low ambient light levels. • When the ambient light falls below a preset level the LEDs will illuminate. • During periods where the lamp may not be used such as in Winter, it is advisable to charge the battery occasionally to maintain it’s performance and before re-using the lamp.