Advertisement
OPERATION
•
Allow at least 8hrs for the battery to fully charge initially.
•
The lamp will illuminate for approximately 30 seconds if it detects motion presence
or sound of voices in close proximity.
CLEANING & MAINTENANCE
•
Clean the unit only with a soft dry cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
•
During periods where the lamp may not be used, it is advisable to charge the
battery occasionally to maintain it's performance and before re-using the lamp.
SPECIFICATION
•
Battery: Ni-MH AA 1.2V 1000mAh rechargeable.
•
Light source : 6 LED 20lm.
•
Solar plate : poly-silicon 2V/130mA.
•
Charge time : >8H.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
2
Made in China. PR2 9PP
Man Rev 1.1
Advertisement
