General Information; Before Initial Assembly - rameder 8.30.07.9001 Manual

1. General information

1.1. This manual:
These instructions contain important information, advice, instructions and WARNINGS on the installation
and use of the support bars on your vehicle, which must be observed. Please read and observe
information and warnings contained in this manual and in the vehicle handbook regarding the proper
installation and use of the support bars.
1.2. Labels:
Caution
Texts with this symbol indicate risks of accident and injury.
Note
Texts with this symbol contain information on how to prevent possible damage to your vehicle.

2. Before initial assembly

Before mounting the support bars, check that the roof rail of your vehicle has a width of 55 mm (2.16 inch).
Place the support bars in the fastening area and check whether the support bar feet rest on the railing
without play. If necessary, have the width adjusted by a specialist company. (Figure 1, arrow, 10 Nm).
10