Table of Contents
Advertisement
2.2
Installation Space
3
Installing the SUN2000
•
The SUN2000 mounting bracket has four groups of tapped holes, each group containing four
tapped holes. Mark any hole in each group based on site requirements and mark four holes in
total. Two round holes are preferred.
•
The SUN2000 is delivered with M12x60 expansion bolts and M12x40 bolt assemblies. If the bolt
assembly length does not meet the installation requirements, prepare M12 bolt assemblies by
yourself and use them together with the delivered M12 nuts.
•
Before installing the mounting bracket, remove the security torx wrench from the mounting
bracket and save it for later use.
For ease of installing the SUN2000
on the mounting bracket,
connecting cables to the bottom of
the SUN2000, and maintaining the
SUN2000 in future, it is
recommended that the bottom
clearance be between 600 mm
(23.62 in.) and 730 mm (28.74 in.).
Round
holes
4
Advertisement
Table of Contents
