Download Print this page

Pclix XT User Manual page 23

Advertisement

Display Firmware Version (48)
The Pclix XT has the ability to indicate which version of firmware is currently installed. This is done by
using the following programming sequence.
Display Firmware Version Programming Sequence (48):
- Turn the Pclix XT OFF
- Set the programming code to 48
- While pushing the red Fire button turn ON Pclix XT to enter programming mode
- After 3 RED LED flashes release FIRE button
The Pclix XT will then flash the Green LED 3 or 4 times indicating the whole number of the firmware
version, followed by one Red LED flash for the decimal, next it will flash the Green LED a number of
times indicating the decimal number of the firmware version. Put those two sets of Green flashes
together and you have the firmware version, example 3.2
Reset Pclix XT to Factory (49)
The Pclix XT as mentioned earlier has internal flash memory, this memory stores all the variable
settings of the Pclix XT. If for some reason the Pclix XT does not seem to be operating correctly then
Resetting the Flash Memory might solve the problem. You can also use this Reset to quickly reload the
factory settings if you want to start with a clean slate. By performing a Reset you will effectively erase
all of your user preferences, camera model code, custom intervals, image count, bulb length, user
changed Infrared Repeats Values, etc, etc,. This Reset CANNOT be undone. To Reset your Pclix XT
follow the steps below.
Reset Pclix XT to Factory Programming Sequence (49):
- Turn the Pclix XT OFF
- Set the programming code to 49
- While pushing the red Fire button turn ON Pclix XT to enter programming mode
- After 3 RED LED flashes release FIRE button
- The RED and GREEN LEDs will flash 2 times
- Push the FIRE button again, the RED and GREEN LEDs will flash 3 more times
- Push FIRE button one last time
- The GREEN LED will flash 4 times to indicate you have successfully Reset your Pclix XT
- Turn OFF the Pclix XT to exit programming mode
- Reset both dials to zero
- You have now just Reset the Pclix XT to it's Factory settings
Pclix XT User Manual 3.2
23 of 28
1017 Visual Effects Inc. - copyright © 2011

Advertisement

loading

Related Products for Pclix XT