Advertisement
Bulb Toggle OFF / ON Programming Sequence (Bulb Toggle OFF 33, Bulb Toggle ON 34):
- Turn the Pclix XT OFF
- Set the programming code to 33 to turn Bulb Toggle OFF or 34 for Bulb Toggle ON
- While pushing the red Fire button turn ON Pclix XT to enter programming mode
- After 3 RED LED flashes release FIRE button
- The GREEN LED will flash 4 times indicating you have successfully set either ON or OFF
- Turn OFF the Pclix XT to exit programming mode
- Reset both dials to zero
User Preferences
The Pclix XT also has a set of User Preferences which can be adjusted to suit various shooting
situations, display the current software version or to reset the Pclix XT to factory settings. The chart
below lists the current preferences available, following the chart there is a description of each
function.
Programming
Code
40
Shutter Push Length
41
Interval Warning Length
42
Green LED Trigger Swap
43
Red LED Trigger Swap
44
Infrared Repeat Value
45
Quick Canon Setup
46
Save User Setup
47
Recall User Setup
48
Display Firmware Version
49
Reset Pclix XT to Factory
Setting Shutter Push Length (40)
This User Preference allows you to set the length of the Shutter Push. By factory default the Shutter
Push Length is set to 20/100ths of a second. This setting only comes into play if the Pclix XT is set to
camera model code 50. Using the programming sequence below you can set the shutter push length
anywhere between 1/100th to 99/100ths of a second in length. If your camera is missing the odd
frame then increasing the Shutter Push Length should solve the problem. Likewise if you are using a
Pclix XT User Manual 3.2
Preference
Can be set to a value of between 1/100ths - 99/100th of a
second (Default is 20/100ths of a second)
Can be set to a value of between 1 - 59 seconds (Default is 20
seconds)
Make the Green LED flash on camera trigger. (Default)
Make the Red LED flash on camera trigger. Allows the user to
have the standard red recording indicator for video recording.
Can be set to a value of 1 - 9 repeats (Default varies
depending upon model code selected).
Quickly configure the Pclix XT to control video recording on
Canon 5DMKII, 7D, T2i, 550D, 600D DSLR Cameras.
Save current setup to Flash memory from Pclix XT.
Recall saved setup from Flash memory into Pclix XT.
Used to display the currently installed firmware of the Pclix XT.
Used to reset the Pclix XT to factory settings.
19 of 28
1017 Visual Effects Inc. - copyright © 2011
Description
Advertisement
