COMPONENTS
Outer Broil heater
1. Remove wire leads
2. Measure resistance after cooling down
Broil heater
1. Remove wire leads
2. Measure resistance after cooling down
Conv. heater
1. Remove wire leads
2. Measure resistance after cooling down
TEST PROCEDURE
-4-3-
RESULTS
Normal : Approximately 23 Ω
Abnomal : Infinite(opened)
NOTE: Ω Value was tested at room temperature
(77F/25˚C)
Be careful the element is sensitive to
temperature.
Normal : Approximately 16.5 Ω
Abnomal : Infinite(opened)
NOTE: Ω Value was tested at room temperature
(77F/25˚C)
Be careful the element is sensitive to
temperature.
Normal : Approximately 82 Ω
Abnomal : Infinite(opened)
NOTE: Ω Value was tested at room temperature
(77F/25˚C)
Be careful the element is sensitive to
temperature.