REMOVIING THE SURFACE ELEMENTS AND THE CERAMIIC GLASS COOKTOP
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
CERAMIC GLASS COOKTOP REMOVAL
Unplug the cord or disconnect power
Remove lamp, controller and back cover (See the page 3-2)
Remove wiring from the cooktop assembly.
Open oven door and remove the 3screws
located at the front of the cook-top, then close
the door.
COMPONENT ACCESS
WARNING
3 Screws
Lift up the cooktop assembly and turn the cooktop
assembly over (protect the cooktop surface).
To remove the surface elements
a) Remove the wires from the element and limiter terminals.
b) Remove the element brackets for the element
you are servicing and the element can be
detached.
REASSEMBLY NOTE: When you reinstall the
element, make sure that the wires are inserted
into the correct tap and that the brackets are
secured firmly. When wiring, refer to the technical
card in order to prevent wires and connectors from mismating.
-3-5-