Amana AE Installation Instructions Manual page 10

AIR CONDITIONER FEATURES
N
RESET
FILTER
TO CHANGE
TEMPERATURE SETTING:
N
RESET
FILTER
Note: Tap or hold either up(^) or down(v) button until the desired temperature is seen on display. This temperature will be
automatically maintained anywhere between 61F (16° C) and 86F (30 ° C) fo r both cooling and heating modes.
If you want the display to read the actual room temperature, "Select the fan only mode" .
N
S
RESET
FILTER
TO USE AUTO FAN FEATURE:
N
S
RESET
FILTER
Note: The fan speed to automatically set to the speed needed to provide optimum comfort settings with the set temperature.
If the room needs more cooling, the fan speed will automatically increase. If the room needs less cooling, the fan spee d
will automatically decrease. Auto fan speed cannot be used when in the Fan Only mode .
:
(continued)
PRESS ON/OFF
BUTTON
PRESS TO RAISE
PRESS TO LOWER
PRESS FAN SPEED
BUTTON
SELECT SPEED
PRESS FAN
SPEED BUTTON
SELECT
AUTO FAN
10
N
RESET
FILTER
N
RESET
FILTER
N
RESET
FILTER
N
RESET
FILTER
:
: