Next 899056 Assembly Instructions

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to
be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Wall fixings are not included.
• WARNING: Do not leave the child unattended.
• WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc.
in near vicinity of the cot. (BS EN 716 & BS EN 12221)
• WARNING: Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the
manufacturer. (BS EN 716)
• WARNING: Do not leave anything in the cot or place the cot close to anothwer product, which could provide a foothold
or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc. (BS EN 716)
• WARNING: Do not use more than one mattress in the cot.
• WARNING: Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance
between the top safety barrier and the wall shall not exceed 75mm or shall be more than 230mm.
• WARNING: Do not place this child's bed near heat sources, windows and other furniture.
• WARNING: Do not use this child's bed if any part is broken, torn or missing.
• Not suitable for use in bathrooms.
• We recommend the use of the wall attachment bracket/strap provided for safety reasons.
• Ensure not to leave items such as ropes, strings, cords, harnesses and belts attached to or hung to the bunk/high bed
due to the risk of strangulation.
• Do not use this item if any structual part is broken or missing.
• High beds and the upper bed of bunk beds are not suitable for children under six years due to risk of injury from falls.
(BS EN 747)
• Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be placed too close to
other furniture or windows, and should be placed either tight to any wall or have a gap of 300mm between the wall and
the side of the bed.
• The lowest adjustable position is the safest, the cot should always be used in this configuration once the baby is old
enough to sit up. (BS EN 716)
• The cot shall no longer be used once the child is able to climb out in order to prevent injury from falling
• All assembly fittings should always be tightened properly. Screws should not be loose because a child can squeeze
Parts of the body, or clothing (e.g. strings, necklaces, ribbons for babies, dummies, etc.) could get caught. There could
be danger of strangulation.
899056 Little Stars Cot Bed
ASSEMBLY INSTRUCTIONS.
(BS EN 12221)
(BS EN 716)
(BS EN 747)
Page 1 of 4
(BS 8509)
(BS EN 716)
Little Stars Cot Bed typ 899056 wersja 4