Next 893141 Assembly Instructions Manual

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Tools Needed
Helpline
If you have any problems with this product or require any
replacement fittings please contact Customer Services Tel:
0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be
faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.
• For safety reasons this item must be fixed to the wall.
PRODUCT INFORMATION
• Made from Partical board & MDF with a pvc foil finish.
• Made in China.
GLASS INFORMATION
• This item contains glass. Please handle with extreme care.
• BS 7449: 1991
• Batch no: 10/2013
• This item contains 5mm annealed mirror glass ,if the glass is chipped or broken replace with glass of the type described on
this label.
• Consult with retailer with regard to obtaining a manufacturing specification and shape for replacement mirror quoting the
model number,batch number and date of manufacture.
CARE INSTRUCTIONS
• Gloss finishes are prone to light surface scratching and it is therefore very important that
you care for this item correctly.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or
damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
893141 BLACK BEVEL TALL CABINET 893141 BLACK BEVEL TALL CABINET
893141 BLACK BEVEL TALL CABINET 893141 BLACK BEVEL TALL CABINET
ASSEMBLY INSTRUCTIONS.
Page 1 of 6