Adamson IS Series User Manual page 2

IS7p User Manual
Distribution Date: March 1st, 2021
Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved
This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe
place and make it available upon request to any operator.
Resale of this product must include a copy of this manual.
This manual can be downloaded from
https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is7p
Declarations
EU Declaration of Conformity
Adamson Systems Engineering declares that the
products stated below are in conformance with the
relevant fundamental health and safety criteria of the
applicable EC Directive(s), in particular:
Directive 2014/35/EU: Low Voltage Directive
967-0001 IS7p - 70 x 40
967-0002 IS7pb - 70 x 40
967-0003 IS7p - 100 x 50
967-0004 IS7pb - 100 x 50
Directive 2006/42/EC: Machinery Directive
930-0031 IS7p & IS10p Fill Plate
930-0032 IS7p Short Fill Plate
934-0027 IS7p Horizontal Bracket
934-0028 IS7p Vertical Bracket
934-0026 IS-Series Sight Mount
932-0006 Bracket C-Clamp
932-0039 IS-Series Pole Mount Adapter
932-0040 IS-Series C-Clamp
932-0041 IS-Series Point H-Clamp
932-0042 IS-Series Tilt Adaptor
932-0044 IS-Series Sight Mount LInk
934-0031 IS-Series Super Sight Mount
934-0032 IS-Series Articulator
Signed at Port Perry, ON. CA - March 1st, 2021
------------------------------------------------
Brock Adamson (President & CEO)
ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario,
Canada
T: +1 905 982 0520, F: +1 905 982 0609
Email: info@adamsonsystems.com
Website: www.adamsonsystems.com