Adamson IS Series User Manual page 2

IS10p User Manual
Distribution Date: March 1st, 2021
Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved
This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe
place and make it available upon request to any operator.
Resale of this product must include a copy of this manual.
This manual can be downloaded from
https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is10p
Declarations
EU Declaration of Conformity
Adamson Systems Engineering declares that the
products stated below are in conformance with the
relevant fundamental health and safety criteria of the
applicable EC Directive(s), in particular:
Directive 2014/35/EU: Low Voltage Directive
963-0004 IS10p - 70 x 40
963-0005 IS10pb - 70 x 40
963-0006 IS10p - 100 x 50
963-0007 IS10pb - 100 x 50
Directive 2006/42/EC: Machinery Directive
934-0029 IS10p Horizontal Bracket
934-0030 IS10p Vertical Bracket
930-0031 IS7p & IS10p Fill Plate
932-0006 IS-Series Bracket C-Clamp
932-0039 IS-Series Pole Mount Adapter
932-0040 IS-Series C-Clamp
932-0041 IS-Series Point H-Clamp
932-0042 IS-Series Tilt Adapter
932-0044 IS-Series Mount Link
934-0026 IS-Series Sight Mount
934-0031 IS-Series Super Sight Mount
934-0032 IS-Series Articulator
Signed at Port Perry, ON. CA - March 1st, 2021
------------------------------------------------
Brock Adamson (President & CEO)
ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario,
Canada
T: +1 905 982 0520, F: +1 905 982 0609
Email: info@adamsonsystems.com
Website: www.adamsonsystems.com