HunterDouglas PowerView Pebble Manual page 7

IMPORTANT: The PowerView
window covering until the window covering has been added
to a GROUP .
Getting started
First, activate the remote by pulling both plastic tabs from the
back battery compartment.
NOTE: If placing the remote module into a Pewter or Clear
Frost Pebble , ensure the provided color insert is seated at the
®
bottom of the Pebble cutout.
10
® Remote will not operate a Inserting the remote module into the PowerView
(hand-held):
1.
Center the Hunter Douglas logo on the remote
module above the indentation on the bottom rim
of the Pebble.
2.
Align the ribs on the remote module with the grooves
on the Pebble.
3.
Gently push the remote module into the Pebble until
it is snug.
Center logo
® Pebble ®
Ribs on remote
to be aligned
with the
grooves on
the Pebble.
11